| ERROR CODE | TYPE OF ERROR | PROBABLE CAUSE | EFFECT | SUGGESTED OPERATIONS |
| E6 | Error while reading or writing the Eeprom memory. | Not programmed or defective Power Module. | The washing cycle is halted. The related error code is displayed. The buzzer emits an acoustic warning. | Reprogram the Power Module.Replace the Power Module. |
| E7 | Troubles with the Motor Pump's Tachometric Dynamo. | The Power Module is not receiving any signal from the Tachometric Dynamo. | The Motor Pump is made work at the maximum speed available. The Error is memorized by the Eeprom and is displayed at the end of the washing cycle. |
Tachometric Dynamo opened or shorted. Wiring. |
| E8 | Missing water heating. | The water temperature of +26°C is not reached after 20 minutes from the beginning of the washing cycle. The water temperature was not increased by 10°C in 20 minutes, starting from +6°C |
The washing cycle is halted. A drain phase is carried out. The related error code is displayed. The buzzer emits an acoustic warning. |
Heating Element.Pressostat.Pressostatic Safety Microswitch.Wiring. |
| E9 | Troubles with the Turbidity Sensor. | The Power Module is not receiving any signal from the Turbidity Sensor. The check is made in the beginning of the cycle, during the first water load. |
This error is immediately displayed in the beginning of the Self-diagnosis. During a normal washing cycle it's memorized in the Eeprom, but it's not displayed. The washing cycle is performed without the savings allowed by a working Turbidity Sensor. |
Defective Turbidity Sensor. WARNING: check that there's NO EXCESS FOAM IN TANK (defective rinse-aid dispenser). If foam is present, carry out a cold pre-wash (Program n.7). |
| EE | The Pressostatic Safety Microswitch protecting the Water heating Element is always OPEN circuited. | This Error is displayed after 2 minutes from the start of the Phase of Heating.. | During the carrying out of the Self-diagnosis, this Error is immediately displayed. During the carrying out of a normal Washing Cycle, the Error is memorized inside the Eeprom and is displayed at the end of the cycle, together with an acoustic signal by the Buzzer. |
Defective Pressostatic Safety Microswitch. Defective Device for the Choice of the basket.Wiring |
| EH | The Pressostatic Safety Microswitch protecting the Water heating Element is always SHORT circuited. | The check of this component is done in the beginning of the Washing Cycle. The check is made during the water load, in the 18 second next to the tripping of the Pressostat to the full tank position. |
During the carrying out of the Self-diagnosis, this Error is immediately displayed. During the carrying out of a normal Washing Cycle, the Error is memorized inside the Eeprom and is displayed at the end of the cycle, together with an acoustic signal by the Buzzer. |
Defective Pressostatic Safety Microswitch.Wiring. |
| EI | OPEN circuited Water Heating Element. Defective relay feeding the Heating Element. On the Power Module. |
The Water Heating Element is not being electrically fed. | The currently carried out Washing Cycle is halted. All the water present in tank is drained. The Error is displayed, together with an acoustic signal from the buzzer. |
Defective Water Heating Element. Connections and/or Wiring. |