Hoover mosógép

Error 0

Faulty coreboard electronic module

• Check connections to main control module

Error 1

Door safety lock error

• Check door is closed and latched correctly
• Check wiring
• Check door lock
• Check drum braking device if fitted

Error 2

Not filled in preset time allowed – washing machine does not fill

• Check mains water pressure
• Check inlet hoses for kinks
• Check inlet filter
• Check water inlet valve
• Pressure switch fault
• Wiring fault

Error 3

Not drained in time allowed – washing machine fails to drain water

• Check that filter is not blocked or obstructed
• Check drain hose is clear of any blockage or obstruction
• Check wiring to drain pump
• Check drain pump is not defective
• Check level sensor or switch
• Check wiring to level sensor

Error 4

Multiple instances of anti-flood contacts in pressure switch being made

• Check for overfoaming evidence – can trip pressure switch
• Check wiring to level sensor
• Check pressure switch is not defective
• Water inlet valve locked open

Error 5

NTC fault – temperature sensor detected as either open circuit or shorted

• Check wiring to temperature sensor
• Check thermistor

Error 6

EEPROM failure – defective electronic controller

• Check wiring
• Check electronic control PCB

Error 7

Motor jam detected or door interlock faulty

See Error 1 for more on the door interlock

• Check motor connector block
• Check wiring
• Check motor carbon brushes
• Check tacho connections
• Check motor

Error 8

Motor tacho fault – washing machine motor tacho detected as open circuit or shorted

• Check motor connector block
• Check wiring
• Check tacho connections
• Check motor

Error 9

Short circuit motor triac on electronic module

• Check wiring
• Check electronic controller

Error 12

Communication error between electronic control boards and wiring

• Check wiring and harness between control boards
• Check electronic control modules

Error 13

Communication error between boards and wiring

• Check wiring and harness between control boards
• Check electronic control modules

Error 14

Water heating error detected or corebaord fault

• Check wiring to wash heater and thermostats
• Check wash heater for continuity
• Check NTC (temperature sensor) probe

Error 15

Defective control module – Not programmed Cuore control

• Reprogram electronic controller
• Replace electronic controller

Error 16

Water heating element detected as short circuit

• Check for defective electrical insulation
• Check water heating element
• Check water heater wiring

Error 17

No signal from motor tachometric generator

• Check motor connector block
• Check wiring
• Check tacho connections
• Check motor

Error 18

Defective control module – also can be wrong electrical input frequency

• Check wiring to electronic controller or both if two used
• Check electrical input frequency
• Check mains electrical supply