Háztartási gép szerviz Budapesten és Pest megyében
Budapesten és Pest megyében

Hoover mosógép

()

Error 0

Faulty coreboard electronic module
  • Check connections to main control module

Error 1

Door safety lock error
  • Check door is closed and latched correctly
  • Check wiring
  • Check door lock
  • Check drum braking device if fitted

Error 2

Not filled in preset time allowed – washing machine does not fill
  • Check mains water pressure
  • Check inlet hoses for kinks
  • Check inlet filter
  • Check water inlet valve
  • Pressure switch fault
  • Wiring fault

Error 3

Not drained in time allowed – washing machine fails to drain water
  • Check that filter is not blocked or obstructed
  • Check drain hose is clear of any blockage or obstruction
  • Check wiring to drain pump
  • Check drain pump is not defective
  • Check level sensor or switch
  • Check wiring to level sensor

Error 4

Multiple instances of anti-flood contacts in pressure switch being made
  • Check for overfoaming evidence – can trip pressure switch
  • Check wiring to level sensor
  • Check pressure switch is not defective
  • Water inlet valve locked open

Error 5

NTC fault – temperature sensor detected as either open circuit or shorted
  • Check wiring to temperature sensor
  • Check thermistor

Error 6

EEPROM failure – defective electronic controller
  • Check wiring
  • Check electronic control PCB

Error 7

Motor jam detected or door interlock faulty

See Error 1 for more on the door interlock

  • Check motor connector block
  • Check wiring
  • Check motor carbon brushes
  • Check tacho connections
  • Check motor

Error 8

Motor tacho fault – washing machine motor tacho detected as open circuit or shorted
  • Check motor connector block
  • Check wiring
  • Check tacho connections
  • Check motor

Error 9

Short circuit motor triac on electronic module
  • Check wiring
  • Check electronic controller

Error 12

Communication error between electronic control boards and wiring
  • Check wiring and harness between control boards
  • Check electronic control modules

Error 13

Communication error between boards and wiring
  • Check wiring and harness between control boards
  • Check electronic control modules

Error 14

Water heating error detected or corebaord fault
  • Check wiring to wash heater and thermostats
  • Check wash heater for continuity
  • Check NTC (temperature sensor) probe

Error 15

Defective control module – Not programmed Cuore control
  • Reprogram electronic controller
  • Replace electronic controller

Error 16

Water heating element detected as short circuit
  • Check for defective electrical insulation
  • Check water heating element
  • Check water heater wiring

Error 17

No signal from motor tachometric generator
  • Check motor connector block
  • Check wiring
  • Check tacho connections
  • Check motor

Error 18

Defective control module – also can be wrong electrical input frequency
  • Check wiring to electronic controller or both if two used
  • Check electrical input frequency
  • Check mains electrical supply

Mennyire volt hasznos ez a bejegyzés?

Kattintson egy csillagra az értékeléshez!

Átlagos értékelés / 5. Szavazatok száma:

Eddig nincs szavazat! Legyen Ön az első, aki értékeli ezt a bejegyzést.