Indesit hibakódok

5
(3)

Mosógép hibakód

HibakódA hibakód jelentéseSzakember segítsége szükségesLehetséges megoldás
FdL, F29Nem lehet kinyitni a mosógép ajtajátNEM/IGENHúzd ki a mosógépet, és várj néhány percet. Ha a probléma továbbra is fennáll, fordulj az illetékes szakszervizhez.
F02A víz leeresztése leálltNEM/IGENHúzd ki a mosógépet, és várj néhány percet. Ha a probléma továbbra is fennáll, fordulj az illetékes szakszervizhez.
F24, F09Túl sok víz vagy ruhaNEM/IGENPróbáld meg csökkenteni a mosógép töltetét. Ha a probléma továbbra is fennáll, fordulj az illetékes szakszervizhez.
F04-F99Egy elektromos alkatrész meghibásodásaIGENVedd fel a kapcsolatot az illetékes szakszervizzel.
F0E4Nem megfelelő vízhőmérsékletNEM/IGENEllenőrizd a mosási ciklus hőmérséklet-beállítását, vagy fordulj az illetékes szakszervizhez.
F0E5Kiegyensúlyozatlan mosógép töltetNEMPróbáld meg egyenletesen elosztani a ruhát a mosógépben.
F1E4Fő relé hibaIGENVedd fel a kapcsolatot az illetékes szakszervizzel.
F3E1, F3E2Nyomásérzékelő problémaIGENVedd fel a kapcsolatot az illetékes szakszervizzel.
F3E4ADS érzékelő hibaIGENVedd fel a kapcsolatot az illetékes szakszervizzel.
F5E1, F5E2, F5E3Mosógép ajtózár probléma, nem záródik, nem nyílik ki a mosógépIGEN/NEMEllenőrizd, hogy az ajtó becsukásakor nem csípődött-e be egy ruhadarab. Ha a hiba a mosási ciklus közben jelentkezik, húzd ki a mosógépet a hálózatból, és várj néhány percet. Ha a probléma továbbra is fennáll, fordulj az illetékes szakszervizhez.
F6E1Kommunikációs hiba az elektronika és a mosógép közöttIGENKapcsold ki, majd be a mosógépet.
F8E1, F8E3, F9E1A mosógép töltésekor nem észlelt vízáramlás, túlfolyás észlelése, vízleeresztés késleltetéseNEMIndítsd újra a mosási programot.

Mosogatógép hibakód

F01

Indesit Dishwasher Error code

Anti-flood sensor fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: OFF

Action: We recommend you check for leaks

F02

Indesit Dishwasher Error code

Water fill solenoid valve, impeller jug or water chamber failure

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF

Action: We recommend you check that water is going to the dishwasher, the valve is working correctly, the impeller jug is functioning correctly, also check the water chamber has no restrictions on the flow rate, if the dishwasher cant fill in the correct amount of time the you will get an error.

F03

Indesit Dishwasher Error code

Water drain failure/ timeout pump problem

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF

Action: We recommend you check for blockages in the system and if fitted to your sink unit there may be a restriction there. Debri in the pump housing, faulty pump

F04

Indesit Dishwasher Error code

Thermostat fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: ON
  • LED 4: OFF

Action: We recommend you check wiring connection and thermostat

F06

Indesit Dishwasher Error code

Water fill timeout fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: ON
  • LED 3: ON
  • LED 4: OFF

Action: Please check that the water supply is present and of sufficient pressure, also that the tap is fully on and that the fill hose is not restricted or kinked. Check that water is going to the dishwasher, the valve is working correctly, the impeller jug is functioning correctly, also check the water chamber has no restrictions on the flow rate, if the dishwasher cant fill in the correct amount of time the you will get an error.

F07

Indesit Dishwasher Error code

Water turbine damaged or fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: ON
  • LED 4: OFF

Action: Replace water turbine (impeller jug)

F08

Indesit Dishwasher Error code

Temperature timeout fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: ON

Action: We recommend you check heating system element, thermostat, ntc sensor

F09

Indesit Dishwasher Error code

Software error fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: ON

Action: this is a fault with the board and normally need reprograming or replacing

F10

Indesit Dishwasher Error code

Heating element fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: ON
  • LED 3: OFF
  • LED 4: ON

Action: We recommend you check the element and replace if faulty see our videos on this.

F11

Indesit Dishwasher Error code

Wash pump motor failure

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: ON

Action: We recommend you check the motor and replace if it is faulty. also check the capacitor for the motor if fitted. sometimes the motor can seize due to the seal on the main pump failing.

F12

Indesit Dishwasher Error code

Main board & Display communication error fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: ON
  • LED 4: ON

Action: We recommend you check the wiring for loose connections or you may have faulty board.

F13

Indesit Dishwasher Error code

Main board fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: OFF
  • LED 3: ON
  • LED 4: ON

Action: We recommend you check the wiring for loose connections or you may have faulty board.

F15

Indesit Dishwasher Error code

Virtual sensor error fault

Issue: The LED lights on your dishwasher are displaying in the following sequence

  • LED 1: ON
  • LED 2: ON
  • LED 3: ON
  • LED 4: ON
  • A01 – Float switch operated.
  • A02 – Open/Short circuit heater relay.
  • A03 – Short circuit on thermistor.
  • A04 – Unable to reach or sense temperature within 70 minutes.
  • A05 – Pressure switch has not been reset.
  • A07 – Open/Short circuit wash motor triac.
  • A08 – Open/Short circuit auxiliary wash motor triac.
  • A09 – Open/Short circuit with main wash triac.
  • A10 – Open/Short circuit fill valve triac.
  • A11 – Half load valve triac or alternating motor action.
  • A12 – Open circuit heater rely.
  • A13 – Open/Short circuit dispenser triac.
  • A14 – Drain hose too low causing syphoning. Check drain hose and re-adjust.
  • H20 – Check tap and pressure of incoming water.

Szárítógép hibakód

  • F01 – Short circuit motor triac.
  • F02 – Motor jammed or fan blocked.
  • F03 – Front thermistor open/short circuit.
  • F04 – No pump piloting.
  • F05 – No feedback from the pump.
  • F08 – Static heater relay with contact welded closed.
  • F09 – Eprom is not programmed or not functioning.
  • F10 – Common of heater open or one shot open.
  • F11 – No pump connection.
  • F12 – Communication error between boards.
  • F13 – Rear thermistor open/short circuit.
  • F15 – Dynamic heater relay with contact welded closed.
  • F-17 – Mater relay welded closed.

Mosó-szárító hibakód

  • F01 – Short circuit motor triac.
  • F02 – Motor jammed tacho detached.
  • F03 – Wash thermistor open/short circuit.
  • F04 – Pressure switch jammed on empty.
  • F05 – Pressure switch jammed on full.
  • F06 – Program selector error.
  • F07 – Heater relay stuck.
  • F08 – Heater relay cannot be activated.
  • F09 – Incompatible Eprom.
  • F10 – Pressure switch not sensing correctly.
  • F11 – Pump cannot be activated.
  • F12 – Communication error.
  • F13 – Dryer fan or dryer thermistor faulty.
  • F14 – Dryer element faulty.
  • F15 – Dryer element relay faulty.
  • H20 – Not fillings. Check tap, hose and inlet valves.
  • LOCKED – Check interlock.

Mennyire volt hasznos ez a bejegyzés?

A weboldal sütiket használ